Software and manuals

KOM300M-S

Managed Copper to Fiber Media Converter, DIN-Rail mounting, 1x 100Base-FX single mode, 2x 10/100Base-TX RJ45, Telnet, SNMPv1/v2, LLDP, HTTP, Modbus TCP, FTP, TFTP
 
      Request for information        

Additional information

The KOM300M is a new member of Kyland ultra low power consumption Green Ethernet series, its full load power consumption is as low as 2.2 watts. The KOM300M industrial media convertor has 1 100Base-FX fiber port and 2 10/100Base-TX copper ports. It supports Telnet, WEB, Kyvision management and works in wide operating temperature range from -40 to 85°C.

The KOM300M series provide 12VDC(9-36VDC), 24VAC/DC(13-50VAC,18-72VDC) redundant power inputs and support IP40 protection class and EMC industrial level 4 requirements. These media convertors are specially designed for harsh industrial environments certified by UL508 and UL Class I Div 2 certifications.

Technical parameters

Product specification
Standard
IEEE 802.3i, IEEE 802.3u
Protocol
Telnet, SNMPv1/v2, LLDP, HTTP, Modbus TCP, FTP, TFTP
Switch Properties
MAC Table: 2K
Packet Buffer: 1Mbit
Packet Forwarding Rate: 0.8Mpps
Switching Delay: less than 5ps
Interface
Fast Ethernet Fiber Ports: 1 100Base-FX, SM/MM port, FC/SC/ST connector
Fast Ethernet RJ45 Ports: 2 10/100Base-TX RJ45 ports
LED
LEDs on Front Panel:
Running LED: Run
Power LED: PWR1, PWR2
Interface LED: Link/ACT, Speed (RJ45 port)
Transmission Distance
Twisted Pair: 100m (Standard CAT5, CAT5e network cable)
Multi Mode Fiber: 1310nm, 5km (100M)
Single Mode Fiber:
1310nm, 40km/60km (100M)
1550nm, 60km/80km (100M)
Power Requirements
Power Input: 12VDC (9-36VDC), 24VAC/DC (18-50VAC/18-72VDC)
Power Terminal: 5-pin 5.08mm-spacing plug-in terminal block
Power Consumption: 2.7W (full load)

Overload Protection: Support
Reverse Connection Protection: Support
Redundancy Protection: Support
Physical Characteristics
Housing: Metal, fanless Protection Class: IP40
Dimensions (WxHxD): 30x115x91.5mm (1.18x4.53x3.60 in.)
Weight: 0.3kg (0.661 pound)
Mounting: DIN-Rail or Panel mounting
Environmental Limits
Operating Temperature: -40 to 85C (-40 to 185F)
Storage Temperature: -40 to 85C (-40 to 185F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
MTBF
462,741 hrs
Warranty
5 years
Approvals
UL508 (pending), Class 1 Div 2 (pending), CE, FCC
Industrial Standard
EMI:
FCC CFR47 Part 15, EN55022/CISPR22, Class A EMS:
IEC61000-4-2 (ESD): 8kV (contact), 15kV (air) IEC61000-4-3 (RS): 10V/m (80MHz-2GHz) IEC61000-4-4 (EFT): Power Port: 4kV Data Port: 2kV IEC61000-4-5 (Surge): Power Port: 2kV/DM, 4kV/CM Data Port:
2kV
IEC61000-4-6 (CS): 3V (10kHz-150kHz) 10V (150kHz-80MHz) IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)
Machinery:
IEC60068-2-6 (Vibration)
IEC60068-2-27 (Shock)
IEC60068-2-32 (Free Fall)
Industry: IEC61000-6-2 Railway: EN50155, EN50121-4