Additional
information
Managed traffic Ethernet switch with 2 Gigabit SFP slots, 1 10/100/1000Base-T(X) ports, RJ45 connector and 7 10/100Base-T(X) ports, RJ45 connector, 9-36VDC, -40 to 85 C operating temperature.
| Product features: |
- 2 Gigabit SFP fiber Uplink ports, 1 RJ45 10/100/1000Base-TX port, 7 RJ45 10/100Base-TX ports
- Supports DT-Ring and DT-Ring+ (Self Healing Rings with a Recovery time of less than 50ms) and Rapid Spanning Tree-RSTP/STP (IEEE802.1w/d)
- Supports Ring, Link, Star and Tangent Ring network topologies
- Ultra low power consumption, the SICOM3170 uses less than 8 Watts of power under fully loaded conditions
- Supports IGMP Snooping, Port Mirroring, QoS, VLAN and link aggregation
- Supports CLI, TELNET, WEB, SNMP v1/v2/v3 and OPC management control
- Supports TACACS+, Radius, SSH/SSL with improved network security functions
- Supports Automatic Network Topology Discovery and Generation with Kyvision3.0 centralized management
- SICOM series uniform Kyvision3.0 management software
- Secure MAC and port binding function, supports static FDB
- Bandwidth setting function enables port bandwidth configuration
- Enhanced Broadcast Storm Control
- EMC industrial level 4, able to work in harsh environments such as strong electromagnetic interference
- Easy installation (slide it into the chassis and it immediately powers up)
- Plug and play, no power supply or electrical connections to worry about, 12VDC or 24VDC power supply is offered by the cabinet backplane
- Compatible with the interface requirements in the Caltrans TEES (170/332) specification.
- Operating temperature: -40 to 85 C (-40 to 185 F)
- Aluminum case with fanless design (Convection Cooled)
- IP40 protection class
|
Technical parameters
| Product specification |
| Network | Ring, chain, star and tangent ring network topology |
| Interface |
| Gigabit SFP port | 2 Gigabit SFP ports, 1000Base-SX/LX/LH/ZX modules with LC connector can be selected |
| 1000M port | 1 10/100/1000Base-TX RJ45 port |
| 100M port | 7 10/100Base-TX RJ45 ports |
| Console port | RS232, RJ45 (Pin2: TXD/Transmitting, Pin3:RXD/Receiving, Pin5: GND/Ground ) |
| Performance |
| Backplane switching capacity | 9.6G |
| MAC Address Table Size | 8K |
| Cable |
| Twisted pair | 0-100m (Standard CAT5 , CAT5e, CAT6, CAT6a network cable) |
| Multi-mode fiber | 1310nm,0-2km (1000M) |
| Single-mode fiber | 1310nm, 0-40km;1550nm, 0-80km |
| Power Requirements |
| Power input | Universal power supply 9-36VDC (12VDC, 24VDC) |
| Power consumption | <8 Watts |
| Physical Characteristics |
| Casing | IP40 protection |
| Design | Aluminum housing fanless design (Convection Cooled) |
| Dimensions(WxHxD) | 58x114x205mm (2.28x4.49x8.07in.) (Including the handle) |
| Weight | 0.8kg (1.764 pound) |
| Installation | Rail installation in Caltrans TEES (170/332) cabinet or any Signal cabinet equipped with a Detector Chassis |
| Environmental Limits |
| Operating Temperature | -40 to 85 C (-40 to 185 F) |
| Storage Temperature | -40 to 85 C (-40 to 185 F) |
| Ambient Relative Humidity | 0 to 95% (non-condensing) |
|
