Produkt został wycofany. Proponujemy modele KIEN6000.

Dokumentacja i Oprogramowanie

KIEN8000-RJ45

Zarządzalny switch Ethernetowy,8 x 10/100Base-T/TX, RJ45 socket, no power-feeding
 
      Zapytaj o produkt        

Dodatkowe informacje

KIEN8000-RJ45 zarządzalny przemysłowy switch z funkcją PSE (Power Sourcing Equipment) oraz zabezpieczeniem IP67. Oferuje 8 portów RJ45, które mogą dostarczyć DC24V i max 300mA do sterowania sprzętem lub urządzeniami zasilającymi.

Parametry techniczne

Tabelka poniżej prezentuje parametry techniczne urządzenia. W przypadku, gdyby prezentowane w niej informacje były niekompletne lub budziły wątpliwości prosimy o kontakt mailem bądź telefonicznie z naszym działem technicznym. Dodatkowo służymy pomocą w doborze właściwego urządzenia tak, aby optymalnie spełniało wymagania Państwa projektu.
Features
Economical Industrial Ethernet Switch
  • 10/100Base-T/TX Ethernet ports, adaptive, full/half duplex, Auto MDI/MDI-X connection.
  • Ethernet ports can supply power; feed-voltage: DC24V; feed-current: 300mA max.
  • Broadcast storm control.
  • Store-and-forward switching mode conforms to IEEE802.3/802.U/802.3X.
  • Transparent transmission of VLAN Tag Packets.
Optional Industrial Power
  • Industrial power input of DC24V(DC18V~36V).
  • Reliable protection for EMC and against over-current/over-voltage.
Rugged Design
  • Solid IP67 housing
  • Operation at -35°C to +75°C
  • Easy DIN-Rail mounting
  • Air humidity 10% to 95%

Main Functions
LED Indicator
The LEDs of the front panel indicate the port status correctly including transmission rate, link status and system status.
Layer-2 Switching
Switches work in two ways: Cut-Through and Store-and-Forward. In Cut-Through, a data packet is immediately relayed further after detecting the target address; in Store-and-Forward, a data packet is first read-in completely and checked for errors before the switch relays the same. KIEN3016 employs Store-and-Forward that is a switching mode widely used.
Power Sourcing
Ethernet ports supply DC24V voltage and 300mA Max current to remote Ethernet instruments or PoE Powered Devices (PD).

Parameters
Product Description
Model KIEN8000
Description PoE-enabled Industrial Ethernet Rail Switch, store and forward switching mode, Ethernet (10 Mbit/s) and Fast-Ethernet (100 Mbit/s).
Port Type and Quantity 8 ′ 10/100Base-T/TX,M12 socket, power-feeding available
Feed voltage DC24V
Feed current 300mA Max
More Interface
Power Terminal 2 x DC power terminal, 3-core
Network size-length of cable
Twisted pair (TP) 100m
Network size - cascadibility
Line - / star topology Any
Power requirements
Power input Dual DC24V(DC 18V~36V)
Power consumption <64W
Performance
Transfer Rate 148810pps
MAC Address Table Size 8K
Service
Diagnostics LEDs (power, link status, port rate), fault relais (24VDC/1A)
Security Port security (MAC based and IP based)
Other services Broadcastlimite
Ambient conditions
Operating temperature -35°C to +75°C
Storage/transport temperature -45°C to +85°C
Relative humidity (non-condensing) 10% to 95%
MTBF 10 years
Mechanical construction
Dimensions (W x H x D) 120mm x 215mm x 66mm
Mounting DIN-Rail or Wall mounting
Protection class IP67
EMC interference immunity
EN 61000-4-2 electrostatic discharge (ESD) +4 kV contact discharge, +8 kV air discharge
EN 61000-4-3 electromagnetic field 10 V/m (80 - 1000 MHz)
EN 61000-4-4 fast transients (burst) +2 KV power line, +1 kV data line
EN 61000-4-5 surge voltage Power line: +2 kV (line/earth), +1 kV (line/line), +1 kV data line
EN 61000-4-6 conducted immunity 3 V (10 kHz - 150 kHz), 10 V (150 kHz - 80 MHz)
EMC emitted immunity
FCC CFR47 Part 15 FCC CFR47 Part 15 Class A
EN 55022 EN 55022 Class A
Approvals
Certificate FCC, CE