В нижеприведенной таблице представлены технические параметры изделия. В случае, если указанной в таблице информации не достаточно, либо данные вызывают сомнения, просим связаться с нашим техническим отделом по электронной почте или телефону. Специалисты помогут подобрать устройство, максимально отвечающее требованиям Вашего проекта.
| Main Functions |
100Mbit/s TP Cable Redundancy |
KIEN1000 offers 2 redundant Ethernet ports to be connected into redundant ring network through TP cable. The system will be able to re-configure within 300ms once disconnection occurs. |
LED Indicator |
The LEDs of the front panel indicate the port status correctly including transmission rate, link status and system status. |
Layer-2 Switching |
Switches work in two ways: Cut-Through and Store-and-Forward. In Cut-Through, a data packet is immediately relayed further after detecting the target address; in Store-and-Forward, a data packet is first read-in completely and checked for errors before the switch relays the same. KIEN1000 employs Store-and-Forward that is a switching mode widely used. |
Power Alarming |
Any power of KIEN1000 fails, alarm signal will be sent out by alarm terminal. The terminal is open when there is no alarm and is closed when alarm occurs. |
| Parameters |
Product Description | | Model | KIEN1000 |
| Description | Unmanaged Industrial Ethernet Rail Switch, store and forward switching mode, Ethernet (10 Mbit/s) and Fast-Ethernet (100 Mbit/s) |
| Port Type and Quantity | 2 x 100Mbit/s, TP cable, RJ45 socket (shielded), redundant,auto-Negotiation
6 x 10/100Base-T/TX, TP cable, RJ45 socket (shielded), Auto-Negotiation, auto MDI/MDI-X connection |
| More Interface |
| Power Terminal | 2 x DC power terminal, 3-core |
| Alarm Terminal | 1 x alarm output terminal, 2-core |
| Network size-length of cable |
| Twisted pair (TP) | 100m |
| Network size - cascadibility |
| Line - / star topology | Any |
| Ring structure (DT-Ring) | 50 Switches (recovery time < 300m) |
| Power requirements |
| Power input | 18V-36V DC redundant power input |
| Power consumption | «6W |
| Performance |
| Transfer Rate | 148810pps |
| MAC Address Table Size | 1K |
| Service |
| Diagnostics | LEDs (power, link status, port rate) fault relais (24VDC/1A) |
| Redundancy |
| Redundancy functions | DT-Ring (ring structure), redundant 24V power suppy |
| Ambient conditions |
| Operating temperature | -35C to +75C |
| Storage/transport temperature | -45C to +85C |
| Relative humidity (non-condensing) | 10% to 95% |
| MTBF | 10 years |
| Mechanical construction |
| Dimensions (W x H x D) | 55.4mm x 142mm x 120.5mm |
| Mounting | DIN-Rail or Wall mounting |
| Protection class | IP40 |
| EMC interference immunity |
| EN 61000-4-2 electrostatic discharge (ESD) | +4 kV contact discharge, +8 kV air discharge |
| EN 61000-4-3 electromagnetic field | 10 V/m (80 - 1000 MHz) |
| EN 61000-4-4 fast transients (burst) | +2 KV power line, +1 kV data line |
| EN 61000-4-5 surge voltage | Power line: +2 kV (line/earth), +1 kV (linebrne), +1 kV data line |
| EN 61000-4-6 conducted immunity | 3 V (10 kHz - 150 kHz), 10 V (150 kHz - 80 MHz) |
| EMC emitted immunity |
| FCC CFR47 Part 15 | FCC CFR47 Part 15 Class A |
| EN 55022 | EN 55022 Class A |
| Approvals |
| Certificate | FCC, CE, UL |
