|
|
Dokumentacja i Oprogramowanie
|
Dodatkowe informacje
Produkty z serii SICOM3009BA to przemysłowe zarządzalne switche Ethernetowe, zgodne z normą bezpieczeństwa ISA RP 12.6. Posiadają 3 porty 100Base-FX i 6 portów 10/100Base-T(X). Charakteryzują się niskim zużyciem energii, nieprzekraczającym 3.99 W. Można nimi zarządzać za pośrednictwem WEB-owego interfejsu Kyvision 3.0. Zarządzanie switchem ułatwia również oprogramowanie OPC.
Parametry techniczne
Tabelka poniżej prezentuje parametry techniczne urządzenia. W przypadku, gdyby prezentowane w niej informacje były niekompletne lub budziły wątpliwości prosimy o kontakt mailem bądź telefonicznie z naszym działem technicznym. Dodatkowo służymy pomocą w doborze właściwego urządzenia tak, aby optymalnie spełniało wymagania Państwa projektu.
| Product features: |
- Supports 3 100Base-FX ports and 6 10/100Base-T(X) RJ45 ports
- Approved by mining safety certification, low power consumption, less than 3.99W under full load
- Supports DT-Ring protocols (Recovery time<50ms), RSTP/STP (IEEE802.1w/d) redundant protocol
- Flexible network topologies: ring, chain, star and tangent ring
- Advanced ring topology protocol avoiding broadcast storm
- Supports IGMP Snooping, port mirroring, QoS, VLAN
- Supports port speed limitation and special broadcast storm control
- Safe MAC and port binding function, static FDB supported
- Bandwidth configuration controls port bandwidth properly
- Supports multiple management functions including CLI, TELNET, WEB, SNMP V1/V2/V3 and OPC
- Power alarm output through dry contact
- Provides alarm input port, AC or DC power supply information can be displayed in the management interface
- Provides system reset and reboot buttons for easy operation
- Supports 3.3VDC power input
- Provides alarm function for AC/DC power supply
- Operating temperature: -40 to 85°C (-40 to 185°F)
- Embedded installation
- Unified management software for SICOM series: Kyvision3.0
|
| Product specification |
| Network |
Ring, chain, star and tangent ring network topology |
| Interface |
| 100M Fiber Ports | 3 x 100Base-FX ports, (FC/SC/ST) |
| 10/100M Copper Ports | 6 x 10/100Base-T(X) ports, RJ45 |
| CONSOLE Interface | RS232, RJ45 |
| Alarm Output Port | 6-Pin 5.08mm-spacing terminal block, 250VAC/350VDC Max; 120mA Max |
| LED Indicator | RUN, ALARM, PWR AC, PWR DC; LINK/ACT (1, 2, 9); 10M/100M, LINK/ACT (3-8) |
| System reset button | one |
| System reboot button | one |
| Performance |
| Backplane switching capacity | 9.6G |
| MAC Address Table Size | 8K |
| Alarm Input Port | 6-Pin 5.08mm-spacing terminal block; When pin5 input high-level voltage, the system is under AC power supply; When pin5 input low-level voltage , the system is under DC power supply |
| Cables |
| Twisted Pair | 0-100m (Standard CAT5, CAT5e network cable) |
| Multi Mode Fiber | 1310nm, 0-5km |
| Single Mode Fiber | 1310nm, 0-40km; 1550nm, 0-80km |
| Power Requirements |
| Power Input | 3.3VDC (3-5.5VDC) |
| Power Terminal | 6-Pin 5.08mm-spacing plug-in terminal block |
| Power Consumption | <3.99W |
| Physical Characteristics |
| Installation | Embedded module |
| Dimensions (WxHxD) | 130x35x107mm (5.12x1.38x4.21 in.) |
| Weight | 0.3kg (0.661 pound) |
| Environmental Limits |
| Operating Temperature | -40 to 85 C (-40 to 185 F) |
| Storage Temperature | -40 to 85 C (-40 to 185 F) |
| Ambient Relative Humidity | 0 to 95% (non-condensing) |
|
